电子胎压计出口西班牙需要什么认证
认证网 (2022/6/21 8:56:20) 浏览:172 评论:0
我司有一批电子胎压计，是用于测量轮胎气压的小电器。图片如下。 要出口西班牙。网上查询的结果是做CE就好了。
但是客户发来下记要求。不确定是否符合，求助各位，不胜感激。
1. Internal production control is the conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 2, 3 and 4, and ensures and declares on his sole responsibility that the electrical equipment concerned satisfy the requirements of this Directive that apply to it.
2. Technical documentation The manufacturer shall establish the technical documentation. The documentation shall make it possible to assess the electrical equipment’s conformity to the relevant requirements, and shall include an adequate analysis and assessment of the risk(s). The technical documentation shall specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the electrical equipment. The technical documentation shall, where applicable, contain at least the following elements:
(a) a general description of the electrical equipment;
(b) conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.;
(c) descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the electrical equipment;
(d) a list of the harmonised standards applied in full or in part the references of which have been published in the Official Journal of the European Union or international or national standards referred to in Articles 13 and 14 and, where those harmonised standards or international or national standards have not been applied, descriptions of the solutions adopted to meet the safety objectives of this Directive, including a list of other relevant technical specifications applied. In the event of partly applied harmonised standards or international or national standards referred to in Articles 13 and 14, the technical documentation shall specify the parts which have been applied;
(e) results of design calculations made, examinations carried out, etc.; and
(f) test reports.
翻译软件翻译结果如下：
1. 内部生产控制是合格评定程序，使制造商履行第2、3和4点所订明的义务，并确保和声明有关的电气设备符合本指示适用的要求。
2. 技术文件制造商应建立技术文件。文件应能评估电气设备是否符合相关要求，并应包括充分的风险分析和评估。技术文件应规定适用的要求，并包括与评估有关的电气设备的设计、制造和操作。技术文件应在适用的情况下至少包含以下内容:
(a)电气设备的一般描述;
(二)元器件、组件、电路等的概念设计和制造图纸及方案;
(c)为了解这些图纸和方案以及电气设备的操作所必需的描述和解释;
(d)在欧盟官方期刊或第13和14条中提及的国际或国家标准中全部或部分引用的适用的协调标准清单，如果这些协调标准或国际或国家标准没有被应用，为满足本指令的安全目标所采用的解决方案的描述，包括适用的其他相关技术规范清单。如果部分采用了第十三条、第十四条所述的协调标准或者国际、国家标准，技术文件应当写明已经采用的部分;
(五)已进行的设计计算、检验等结果;和
测试报告(f)。
但是客户发来下记要求。不确定是否符合，求助各位，不胜感激。
1. Internal production control is the conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 2, 3 and 4, and ensures and declares on his sole responsibility that the electrical equipment concerned satisfy the requirements of this Directive that apply to it.
2. Technical documentation The manufacturer shall establish the technical documentation. The documentation shall make it possible to assess the electrical equipment’s conformity to the relevant requirements, and shall include an adequate analysis and assessment of the risk(s). The technical documentation shall specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the electrical equipment. The technical documentation shall, where applicable, contain at least the following elements:
(a) a general description of the electrical equipment;
(b) conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.;
(c) descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the electrical equipment;
(d) a list of the harmonised standards applied in full or in part the references of which have been published in the Official Journal of the European Union or international or national standards referred to in Articles 13 and 14 and, where those harmonised standards or international or national standards have not been applied, descriptions of the solutions adopted to meet the safety objectives of this Directive, including a list of other relevant technical specifications applied. In the event of partly applied harmonised standards or international or national standards referred to in Articles 13 and 14, the technical documentation shall specify the parts which have been applied;
(e) results of design calculations made, examinations carried out, etc.; and
(f) test reports.
翻译软件翻译结果如下：
1. 内部生产控制是合格评定程序，使制造商履行第2、3和4点所订明的义务，并确保和声明有关的电气设备符合本指示适用的要求。
2. 技术文件制造商应建立技术文件。文件应能评估电气设备是否符合相关要求，并应包括充分的风险分析和评估。技术文件应规定适用的要求，并包括与评估有关的电气设备的设计、制造和操作。技术文件应在适用的情况下至少包含以下内容:
(a)电气设备的一般描述;
(二)元器件、组件、电路等的概念设计和制造图纸及方案;
(c)为了解这些图纸和方案以及电气设备的操作所必需的描述和解释;
(d)在欧盟官方期刊或第13和14条中提及的国际或国家标准中全部或部分引用的适用的协调标准清单，如果这些协调标准或国际或国家标准没有被应用，为满足本指令的安全目标所采用的解决方案的描述，包括适用的其他相关技术规范清单。如果部分采用了第十三条、第十四条所述的协调标准或者国际、国家标准，技术文件应当写明已经采用的部分;
(五)已进行的设计计算、检验等结果;和
测试报告(f)。
检测认证热线：18768485300 & QQ在线服务:
上一篇：有没有谁会做SGS 卫检报告下一篇：寻求沙特SABER认证建材类
相关内容：
- 暂无内容！
