可以满足要求的认证服务机构，请联系我，有单，寻求服务。
认证网 (2021/7/28 9:09:07) 浏览:265 评论:1
可以满足客户如下要求的认证服务机构，请联系我，有单，寻求服务。
About below point, please note primary requirements of G-mark Certification are Safety and EMC test reports.
In this case, since the product does not have additional low voltage power supply output, EMC test report is not a requirement.
Safety test report should cover the following standards:
IEC 60884-1:2002+AMD1:2006+AMD2:2013 & IEC 60884-2-7:2011+AMD1:2013 or BS 1363-2:2016+A1:2018
GSO 2117:2011 (Requirement for cord extension sets going to KSA)
Also, for your information, the Safety test report will be accepted from below labs:
CBTL (list can be found in this link: https://www.iecee.org/dyn/www/f?p=106:42:0) – Safety test report along with CB certificate is a requirement. The product will be tested under IEC 60884 standards instead of BS 1363.
NB (GSO Notified Bodies) – The product may be tested with Safety standards IEC 60884-1:2002+AMD1:2006+AMD2:2013 & IEC 60884-2-7:2011+AMD1:2013 or BS 1363-2:2016+A1:2018. CB Certificate is not a requirement unless CBTL.
In house laboratories as per the Article 22 of the regulation. (you may find this part of regulation in this link: https://www.gso.org.sa/wp-conten ... es-BD-142004-01.pdf on page 23) - The product may be tested with Safety standards IEC 60884-1:2002+AMD1:2006+AMD2:2013 & IEC 60884-2-7:2011+AMD1:2013 or BS 1363-2:2016+A1:2018. CB Certificate is not a requirement unless CBTL.
About below point, please note primary requirements of G-mark Certification are Safety and EMC test reports.
In this case, since the product does not have additional low voltage power supply output, EMC test report is not a requirement.
Safety test report should cover the following standards:
IEC 60884-1:2002+AMD1:2006+AMD2:2013 & IEC 60884-2-7:2011+AMD1:2013 or BS 1363-2:2016+A1:2018
GSO 2117:2011 (Requirement for cord extension sets going to KSA)
Also, for your information, the Safety test report will be accepted from below labs:
CBTL (list can be found in this link: https://www.iecee.org/dyn/www/f?p=106:42:0) – Safety test report along with CB certificate is a requirement. The product will be tested under IEC 60884 standards instead of BS 1363.
NB (GSO Notified Bodies) – The product may be tested with Safety standards IEC 60884-1:2002+AMD1:2006+AMD2:2013 & IEC 60884-2-7:2011+AMD1:2013 or BS 1363-2:2016+A1:2018. CB Certificate is not a requirement unless CBTL.
In house laboratories as per the Article 22 of the regulation. (you may find this part of regulation in this link: https://www.gso.org.sa/wp-conten ... es-BD-142004-01.pdf on page 23) - The product may be tested with Safety standards IEC 60884-1:2002+AMD1:2006+AMD2:2013 & IEC 60884-2-7:2011+AMD1:2013 or BS 1363-2:2016+A1:2018. CB Certificate is not a requirement unless CBTL.
检测认证热线：18768485300 & QQ在线服务:
相关内容：
- 暂无内容！
