卡口灯座|坦桑尼亚标准|TZS 1472:2011
认证网 (2019/12/11 11:38:49) 浏览:372 评论:0
卡口灯座|坦桑尼亚标准|TZS 1472:2011
TZS 1472:2011
Bayonet lampholders
Applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. Also applies to switched-lampholders for use in a.c. circuits only, where the working voltage does not exceed 250 V r.m.s. Also applies to lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 25 V, to be used indoors, and to lampholders with Edison thread E10 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 60 V, to be used indoors or outdoors. Also applies to lampholders E10 for building-in, for the connection of single lamps to the supply. Also covers lampholders other than lampholders with Edison thread designed for connection of series-connected lamps to the supply
卡口灯座
适用于具有Edison螺纹E14，E27和E40的灯座，其设计仅用于连接灯和半光源。 也适用于交流电中使用的开关灯座 仅适用于工作电压不超过250 V r.m.s的电路。 也适用于爱迪生螺纹E5的灯头，该灯头设计用于连接电压不超过25 V的串联连接的灯具的电源，供室内使用，以及适用于爱迪生螺纹E10的灯头设计用于连接至串联的电源的灯头。 在室内或室外使用的，工作电压不超过60 V的已连接灯。 也适用于内置式灯座E10，用于将单个灯连接到电源。 还覆盖了具有爱迪生螺纹的灯座以外的灯座，其设计用于将串联连接的灯连接到电源
TZS 1472:2011
Bayonet lampholders
Applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. Also applies to switched-lampholders for use in a.c. circuits only, where the working voltage does not exceed 250 V r.m.s. Also applies to lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 25 V, to be used indoors, and to lampholders with Edison thread E10 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 60 V, to be used indoors or outdoors. Also applies to lampholders E10 for building-in, for the connection of single lamps to the supply. Also covers lampholders other than lampholders with Edison thread designed for connection of series-connected lamps to the supply
卡口灯座
适用于具有Edison螺纹E14，E27和E40的灯座，其设计仅用于连接灯和半光源。 也适用于交流电中使用的开关灯座 仅适用于工作电压不超过250 V r.m.s的电路。 也适用于爱迪生螺纹E5的灯头，该灯头设计用于连接电压不超过25 V的串联连接的灯具的电源，供室内使用，以及适用于爱迪生螺纹E10的灯头设计用于连接至串联的电源的灯头。 在室内或室外使用的，工作电压不超过60 V的已连接灯。 也适用于内置式灯座E10，用于将单个灯连接到电源。 还覆盖了具有爱迪生螺纹的灯座以外的灯座，其设计用于将串联连接的灯连接到电源
检测认证热线：18768485300 & QQ在线服务:
相关内容：
