电能计量设备|坦桑尼亚标准|TZS 1628-1:2014
认证网 (2019/11/4 9:16:20) 浏览:506 评论:0
电能计量设备|坦桑尼亚标准|TZS 1628-1:2014
TZS 1628-1:2014
Electricity metering equipment (AC) — General requirements, tests and test conditions — Part 11: Metering equipment
Covers type tests for electricity metering equipment for indoor and
outdoor application and applies to newly manufactured equipment designed to measure the
electrical energy on 50 Hz or 60 Hz networks, with a voltage up to 600 V.
It applies to electromechanical or static meters for indoor and outdoor application consisting
of a measuring element and register(s) enclosed together in a meter case. It also applies to
operation indicator(s) and test output(s). If the meter has a measuring element for more than
one type of energy (multi-energy meters), or when other functional elements, such as
maximum demand indicators, electronic tariff registers, time switches, ripple control receivers,
data communication interfaces, etc. are enclosed in the meter case, then the relevant
standards for these elements apply.
电能计量设备（AC）—一般要求，测试和测试条件—第11部分：计量设备
涵盖室内和室外电表设备的型式试验
户外应用，并适用于旨在测量
50 Hz或60 Hz网络上的电能，电压最高为600V。
适用于室内外应用的机电式或静态电表
装在仪表盒中的测量元件和寄存器的零件。 它也适用于
操作指示器和测试输出。 如果仪表的测量元件超过
一种能量类型（多能量计），或其他功能元素（例如
最大需求指标，电子收费表，时间开关，纹波控制接收器，
数据通信接口等被封装在仪表外壳中，然后相关
这些元素的标准适用。
TZS 1628-1:2014
Electricity metering equipment (AC) — General requirements, tests and test conditions — Part 11: Metering equipment
Covers type tests for electricity metering equipment for indoor and
outdoor application and applies to newly manufactured equipment designed to measure the
electrical energy on 50 Hz or 60 Hz networks, with a voltage up to 600 V.
It applies to electromechanical or static meters for indoor and outdoor application consisting
of a measuring element and register(s) enclosed together in a meter case. It also applies to
operation indicator(s) and test output(s). If the meter has a measuring element for more than
one type of energy (multi-energy meters), or when other functional elements, such as
maximum demand indicators, electronic tariff registers, time switches, ripple control receivers,
data communication interfaces, etc. are enclosed in the meter case, then the relevant
standards for these elements apply.
电能计量设备（AC）—一般要求，测试和测试条件—第11部分：计量设备
涵盖室内和室外电表设备的型式试验
户外应用，并适用于旨在测量
50 Hz或60 Hz网络上的电能，电压最高为600V。
适用于室内外应用的机电式或静态电表
装在仪表盒中的测量元件和寄存器的零件。 它也适用于
操作指示器和测试输出。 如果仪表的测量元件超过
一种能量类型（多能量计），或其他功能元素（例如
最大需求指标，电子收费表，时间开关，纹波控制接收器，
数据通信接口等被封装在仪表外壳中，然后相关
这些元素的标准适用。
检测认证热线：18768485300 & QQ在线服务:
相关内容：
