灯具|矿灯|节能灯|圣诞灯|LED灯|乌干达PVOC认证
认证网 (2014/5/24 11:07:02) 浏览:690 评论:0
灯具|矿灯|节能灯|圣诞灯|LED灯进入乌干达市场销售前必须要通过出货之前进行验货，并拿到合格的PVOC认证证书之后，才能顺利进入乌干达。如果没有通过PVOC认证，将在目的港被扣压强制性要求进行检测，同时会被罚款，罚款额为货值的15%。
为了快速、低成本帮助中国企业进入乌干达市场，我们将针对不同的企业和不同的产品，提供最为合理的方案 ，快速拿到乌干达PVOC证书。
灯具|矿灯|节能灯|圣诞灯|LED灯乌干达PVOC认证流程：
1 递交申请资料
2 授权发证机构审核资料
3 批准验货同时通知申请人
4 验货人员到工厂验货
5 评估验货报告
6 出具证书草稿件
7 签发PVOC-COC清关证书
如果验货不合格，就不会出具草稿件，也就不能签发证书。这样可能要求对产品进行整改，重新验货，从而又会 产生验货的费用，对申请公司来说，又浪费时间和金钱，所以在验货之前能够和我们确认好，没有问题在进行验货。
灯具|矿灯|节能灯|圣诞灯|LED灯出口的需要达到的相应标准要求，乌干达标准
US IEC 60238:2004, Edison screw lamp holders
US IEC 60061-1:2003, Lamp caps and holders : Lamp caps
US IEC 60061-3: 2003, Lamp caps and holders –Gauges
US IEC 60400:1999 Lamp holders for tubular fluorescent lamps and starter holders
US IEC 60901:1996 Single-capped fluorescent lamps – Performance specifications
US IEC 60921:2004 Ballasts for tubular fluorescent lamps—Performance requirements
US IEC 61199:1999 Single-capped fluorescent lamps–Safety specifications
US 254:2000 Specification for Tungsten filament lamps for general lighting service
US EAS 378-6-1: 2005, Automatic transfer switching equipment –
US EAS 375-3: 2005, Low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use distribution boards
US EAS 378-6-2: 2005, Multiple function equipment control and protective switching devices （or equipment） （CPS）
US EAS 378-5-6: 2005, Proximity sensors and switching amplifiers （NAMUR）
US EAS 378-5-2: 2005, Proximity switches
US IEC 61058-1: 2001, Switches for appliances Part 1: General requirements
US IEC 61058-2-1: 1994, Switches for appliances Part 2-1: cord switches
US IEC 60947-3: 1999, Switches, diconnectors, switch-disconnectors and fuse-combination units
US IEC 61058-2-5: 1994, Switches - change-over selectors
US IEC 61058-2-4: 2003, Switches - independently mounted switches
US IEC 60669-2-4: 2004,Switches - Isolating
US IEC 60669-2-1: 2002, Switches– Electronic switches
US IEC 60669-1: 2000, Switches -Part 1: General requirements
US IEC 60669-2-3: 1997, Switches Time-delay switches （TDS）
US IEC 60669-2-2: 2002, Switches: remote control switches （RCS）
US IEC 60947-1: 2004, Switchgear and control gear Part 1: General rules
US EAS 378-7-3: 2005, Ancillary equipment safety requirements for fuse terminal blocks
US IEC 60884 - 2 – 1, Fused Plugs
US EAS 388-1: 2005,Fuses - Current limiting fuses
US EAS 388-2: 2005,Fuses - Expulsion fuses
US IEC 60884 - 2 – 1, Fused Plugs
US IEC 60884 – 1, Plugs & Sockets
US 255:2000, Junction boxes for use in electrical installations
灯具|矿灯|节能灯|圣诞灯|LED灯出口乌干达办理认证的周期大概需要30天左右（包括测试费用为20天左右）
为了快速、低成本帮助中国企业进入乌干达市场，我们将针对不同的企业和不同的产品，提供最为合理的方案 ，快速拿到乌干达PVOC证书。
灯具|矿灯|节能灯|圣诞灯|LED灯乌干达PVOC认证流程：
1 递交申请资料
2 授权发证机构审核资料
3 批准验货同时通知申请人
4 验货人员到工厂验货
5 评估验货报告
6 出具证书草稿件
7 签发PVOC-COC清关证书
如果验货不合格，就不会出具草稿件，也就不能签发证书。这样可能要求对产品进行整改，重新验货，从而又会 产生验货的费用，对申请公司来说，又浪费时间和金钱，所以在验货之前能够和我们确认好，没有问题在进行验货。
灯具|矿灯|节能灯|圣诞灯|LED灯出口的需要达到的相应标准要求，乌干达标准
US IEC 60238:2004, Edison screw lamp holders
US IEC 60061-1:2003, Lamp caps and holders : Lamp caps
US IEC 60061-3: 2003, Lamp caps and holders –Gauges
US IEC 60400:1999 Lamp holders for tubular fluorescent lamps and starter holders
US IEC 60901:1996 Single-capped fluorescent lamps – Performance specifications
US IEC 60921:2004 Ballasts for tubular fluorescent lamps—Performance requirements
US IEC 61199:1999 Single-capped fluorescent lamps–Safety specifications
US 254:2000 Specification for Tungsten filament lamps for general lighting service
US EAS 378-6-1: 2005, Automatic transfer switching equipment –
US EAS 375-3: 2005, Low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use distribution boards
US EAS 378-6-2: 2005, Multiple function equipment control and protective switching devices （or equipment） （CPS）
US EAS 378-5-6: 2005, Proximity sensors and switching amplifiers （NAMUR）
US EAS 378-5-2: 2005, Proximity switches
US IEC 61058-1: 2001, Switches for appliances Part 1: General requirements
US IEC 61058-2-1: 1994, Switches for appliances Part 2-1: cord switches
US IEC 60947-3: 1999, Switches, diconnectors, switch-disconnectors and fuse-combination units
US IEC 61058-2-5: 1994, Switches - change-over selectors
US IEC 61058-2-4: 2003, Switches - independently mounted switches
US IEC 60669-2-4: 2004,Switches - Isolating
US IEC 60669-2-1: 2002, Switches– Electronic switches
US IEC 60669-1: 2000, Switches -Part 1: General requirements
US IEC 60669-2-3: 1997, Switches Time-delay switches （TDS）
US IEC 60669-2-2: 2002, Switches: remote control switches （RCS）
US IEC 60947-1: 2004, Switchgear and control gear Part 1: General rules
US EAS 378-7-3: 2005, Ancillary equipment safety requirements for fuse terminal blocks
US IEC 60884 - 2 – 1, Fused Plugs
US EAS 388-1: 2005,Fuses - Current limiting fuses
US EAS 388-2: 2005,Fuses - Expulsion fuses
US IEC 60884 - 2 – 1, Fused Plugs
US IEC 60884 – 1, Plugs & Sockets
US 255:2000, Junction boxes for use in electrical installations
灯具|矿灯|节能灯|圣诞灯|LED灯出口乌干达办理认证的周期大概需要30天左右（包括测试费用为20天左右）
检测认证热线：18768485300 & QQ在线服务:
相关内容：
